Package Content List; General Safety Instructions - stayer GAS CUTTER 33 Manual De Instrucciones

This manual is consistent with the date of manufacture of
your machine, you will find information on the technical
data of the machine acquired manual check for updates
of our machines on the website: www.grupostayer.com
APPLICATION
1.
Depending on the assembled cutting tools, the bush cutter
can be used to mow lawns or meadows, and to trim scrub,
shrubs, bushes and very small trees. It is for private use.
The device cannot be used for other purposes.
WARNING! Read this manual and general
safety instructions carefully before using the
appliance, for your own safety. Your power tool
should only be passed on together with these
instructions.
OVERVIEW COMPONENTS (FIG A)
2.
1 Sheet or cutting line.
2 Drive shaft assembly
3
Throttle trigger
4 Ignition switch
5 Safety switch
6
'Bike' handle
7 Harness attachment
8 Air filter cover
9 Knob fuel tank
10 Fuel tank
11 Primer bulb
12 Choke
13 Protection guard
14 Spool
15 Trigger lock
16 Connecting rod
17 Professional harness
18 Shoulder strap

PACKAGE CONTENT LIST

3.
- Remove all packing materials
- Remove remaining packaging and transit supports (if
existing)
- Check the completeness of the packing content
- Check the appliance, the power cord, the power plug
and all accessories for transportation damages.
- Keep the packaging materials as far as possible till
the end of the warranty period. Dispose it into your
local waste disposal system afterwards.
WARNING Packing materials are no toys! Children
must not play with plastic bags! Danger of suffocation!
1 x Brush cutter / 1 x Harness / 1 x Cutting disc 1 x Spool
/ 1 x Manual
When parts are missing or damaged, please
contact your dealer.
ENGLISH
24
SYMBOLS
4.
In this manual and/or on the machine the following
symbols are used:
Read the manual before using the machine.
Denotes risk of personal injury or damage to the
tool.
In accordance with essential applicable safety
standards of European directives.
Keep a minimum distance of 15m between the
machine and third parties during use.
Watch out for particles generated by the cutting
installation.
Use the cutting installation exclusively in
combination with the shrub knife.
Use the cutting installation exclusively in
combination with the threading head.
Wear sturdy shoes with antiskid soles!
Wear approved hearing protection and safety
glasses.
Wear good and sturdy gloves!
Wear good and solid working clothes!
WATCH OUT Fire hazard! Gasoline and vapors
are easily inflammable!
The exhaust fumes are toxic and can cause
suphocation!

GENERAL SAFETY INSTRUCTIONS

5.
Read all safety warnings and instructions.
Working area
- Keep working area clean and well lit. Untidy and dark
areas can lead to accidents.
- Do not operate tools in potentially explosive
surroundings, for example, in the presence of
inflammable liquids, gases or dust. Tools create
sparks which may ignite the dust or fumes.
- Keep children and bystanders at a distance when
operating a tool. Distractions can cause you to lose
control of it.
Personal safety
- Stay alert, watch what you are doing and use common
sense when operating a tool. Do not use a tool
when you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention when
operating a tool may result in serious personal injury.
24