Cleaning And Maintenance - cecotec CONGA POPSTAR 7000 MATTRESS Manual De Instrucciones

Aspirador de colchones con luz uv y cepillo motorizado
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
ENGLISH
Full cleaning mode: Vacuuming, Brush rotation & Mite removal
-
Turn the device on. It will run under Full cleaning mode (Vacuuming, Patting & Mite removal
with UV-C light) by default. The corresponding light indicator will turn on.
-
Press the On/Off button once to turn the device off.
Vacuuming & Brush rotation mode
-
Once the device is turned on in the Full cleaning mode, press the Mode button to switch to
Vacuuming & Patting mode. The corresponding light indicator will turn on.
-
Press the On/Off button once to turn the device off.
Vacuuming & Mire removal mode
-
Once the device is turned on in the Vacuuming & Patting mode, press the Mode button to
switch to Dust & Mite removal mode. The corresponding light indicator will turn on.
-
Press the Mode button once to return to the Full cleaning mode.
-
Press the On/Off button once to turn the device off.
Note
The 3 operating modes are set in a cycle. Press the Cleaning mode button once to switch from
one to another following the before order.
Warning
In order to avoid accidental injury, the UV lamp must be placed within 5 cm of the object to be
irradiated and the machine inclination must not exceed 30º. Outside this range, the UV lamp
will turn automatically off. Under this premise, the Mite removal mode indicator turns on,
indicating that the UV lamp is working normally.
After the mite eliminator starts to work, the hot air outlet continues to emit hot air and the
hot air temperature is high. Do not touch the hot air outlet with your hand while the machine
is working.

4. CLEANING AND MAINTENANCE

-
It is recommended to clean the dust tank after each use; when the filter dust is blocked due
to excessive dust, it needs to be cleaned and replaced if necessary.
-
If the dust tank is filled with dust during the process of use, clean it immediately.
-
When the device has reached 30 hrs.- 50 hrs. use, (depending on the use of filter cotton), it
is suggested to buy a new filter cotton and change the air inlet filter cotton so as to ensure
good performance of the machine.
CONGA POPSTAR 7000 MATTRESS
38

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

05568

Tabla de contenido