Axis Communications T99A10 Guia De Instalacion página 23

All manuals and user guides at all-guides.com
AXIS T99A10 Positioning Unit 24 V AC/DC
13. Replace the positioning unit on the base unit making sure that the arrows on the two
units are aligned.
14. Turn the positioning unit clockwise back to its original position and tighten the four
base unit screws (torque 3.0 Nm).
NO NO TICE NO TICE TICE
Make sure that the cables do not get not pinched when mounting the two units.
You have different options for installing the network link:
• A: via an optical fiber or RJ45 cable connected to the SFP module (with a respective
connector) in the SFP slot.
• B: via an RJ45 cable connected to the fixed RJ45 connector.
23
EN