Specifications; Sd Card Slot; Connectors - Axis Communications T99A10 Guia De Instalacion

All manuals and user guides at all-guides.com
AXIS T99A10 Positioning Unit 24 V AC/DC

Specifications

To find the latest version of the product's datasheet, go to axis.com > [product] > Support &
Documentation.

SD card slot

NO TICE TICE
NO NO TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects or excessive force when
inserting or removing the SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product
is running. Disconnect power before removal.
This product supports SD/SDHC/SDXC cards (not included). For SD card recommendations, see
www.axis.com

Connectors

Network connector
RJ45 Ethernet connector.
SFP connector.
NO TICE TICE
NO NO TICE
The product shall be connected using a shielded network cable (STP) or an optical fiber
cable. All cables connecting the product to the network shall be intended for their
specific use. Make sure that the network devices are installed in accordance with
the manufacturer's instructions. For information about regulatory requirements, see
Electromagnetic compatibility (EMC) 8.
I/O connectors
Use the I/O connector with external devices in combination with, for example, tampering alarms,
motion detection, event triggering, and alarm notifications. In addition to the 0 V DC reference
point and power (DC output), the I/O connector provides the interface to:
Digital output - For connecting external devices such as relays and LEDs. Connected devices can
be activated by the VAPIX® Application Programming Interface or in the product's webpage.
Digital input - For connecting devices that can toggle between an open and closed circuit, for
example PIR sensors, door/window contacts, and glass break detectors.
A digital light sensor - For receiving a value of the ambient light intensity from an external light
sensor. This is used to control the product's day and night functionality.
35
EN