Install The Ptz Driver - Axis Communications T99A10 Guia De Instalacion

AXIS T99A10 Positioning Unit 24 V AC/DC
1
Bottom cover gasket
2
Camera housing cover screw (T20, x4)
11. Mount the top cover to the bottom cover, and alternately tighten the four cover screws
a few turns at a time until all screws are tight (T20, torque 1.5 Nm). This helps ensure
that the gasket in the bottom cover is compressed evenly.

Install the PTZ driver

This product supports several PTZ devices. For a complete list of supported devices, see
www.axis.com.
A PTZ driver is required to use this product with a PTZ device.
Important
Some cameras may need to be installed upside down in the camera housing, and some may
use the auto-rotation feature. Before installing the PTZ driver, modify the image settings
on your camera's live view to rotate the image right side up, and disable auto-rotation.
To install the PTZ driver from the live view of your camera:
1. Go to PTZ > Driver Selection.
2. To find the driver (e.g. driver.ptz), click Browse, and then click Upload.
3. Select the uploaded driver from the Select driver to use drop-down list.
4. To enable PTZ, select Activate PTZ.
All manuals and user guides at all-guides.com
32