TC Electronic MAGUS PRO Guia De Inicio Rapido

Quick Start Guide
MAGUS PRO DISTORTION
Classic High Gain Distortion Pedal with Fat Mids, Treble Filter Control and
3 Clipping Modes
(1) (2) (3)
(4)
(5)
(8)
V 1.0
1. OUT – Send the signal to other pedals or a
guitar amp via ¼" cable.
2. 9 V DC – Connect a standard 9 V power supply
(not included). The pedal does not accept
batteries.
(6)
IN – Connect your guitar via ¼" cable.
3.
GAIN – Adjusts the amount of distortion and
4.
saturation. Due to low slew rate of the opamp,
(7)
more gain will result in a darker tone.
5. LED – Lights when the pedal is engaged.
6. VOLUME – Adjusts the output level when the
pedal is engaged.
7. MODE switch – Selects distortion mode:
CLASSIC = High-gain distortion
(9)
FAT = Boosted low frequencies
TURBO = Engages LED clipping diodes for
more output and increased headroom.
8. FILTER – Cuts high frequencies as the knob is
turned clockwise.
9. FOOTSWITCH – Press to engage or bypass
the pedal. True bypass leaves the guitar signal
completely unaffected whenever the pedal is
not engaged.