Legal Information - Laevo FLEX V3.0 Guía Rápida

Installation (see image D)
Attach all parts as shown.
After you replace or adjust parts, make sure that the parts
are connected correctly before you use the FLEX.
Fitting (see image E)
Do the fitting process for the FLEX, as shown in the
drawings. Start with the front vest, then the hip frame
and then the torso structures.
Before you use the FLEX, put away any remaining length
of the belts.
Using the FLEX
It takes time to learn to use the FLEX comfortably and
effectively. Do not use the FLEX if it causes discomfort or
pain. When the pain is gone, start to use the FLEX again
and gradually increase the duration and frequency.
Day 1 Day 2
max. 1 hr max. 2 hr
Daily use
After you use the FLEX, clean and dry it.
Keep the FLEX in a dry place.
Day 3 Day 4
max. 4 hr max. 8 hr
Maintenance
You can wash the padding and textile parts. Follow the
instructions on the label or from the User Manual.
Check for damage regularly.

Legal information

Liability
Laevo B.V. cannot be held liable for: [a] Personal injury
or damage to property when a user or third party does
not follow the recommendations and warnings in this
manual, [b] damage when changes are made to the
original product; [c] wear and damage when the user has
not used the product correctly, [d] damage when non-
original replacement parts have been used.
Warranty
The product is covered by the Laevo Business Warranty. It
can be found at
www.laevo-exoskeletons.com/legal.
Contact Laevo or your supplier to get a printed version.
CE
This product meets the requirements of European
Regulation (EU) 2016/425 on personal protective
equipment.
For the complete Declaration of Conformity and contact
details see
www.laevo-exoskeletons.com/legal
Specifications & Sizing tables
Check online at
www.laevo-exoskeletons.com/flex-training
5
EN