cable matters 201085 Manual Del Usuario página 7

3.2 Remote Installation
Remove the insulating tab from the end of the battery and
check that the battery is installed correctly
Troubleshooting tips:
Replace the battery
•
Make sure the Switch is turned on and remote control
•
is not turned off on the Switch
3.3 Connection Instructions
1. Power off all source equipment
2. Make sure the switch is "OFF" before connecting any device
3. Optional: Connect a Micro-B charging cable to a wall charger
(charging cable not included)
4. Connect the switch box to up to 2 USB-C-equipped computers
with the provided USB-C cables
5. Connect the switch box to up to 2 displays via HDMI and Display-
Port
6. Connect the switch box to up to 4 USB peripherals through the
USB-A ports
www.cablematters.com
5
®
USB-C KVM Switch for 2 Computers