Lionelo Hugo Manual De Usuario página 8

Safety seat outline (fig. 2)
1.
Headrest
2.
Backrest
3.
Seat
4.
Seatbelt handle
5.
Seatbelt guide
How to fix backrest
1.
Place the backrest horizontally behind the seat, put the hinge on the seat
connector (fig. 3A).
2.
Straighten the backrest so that the hinge is inserted in the seat connector
(fig. 3B).
3.
Straighten the backrest completely (fig. 3C).
NOTE: When assembling the backrest, make sure there is nothing between
the backrest and seat. Watch your fingers during assembly.
How to adjust headrest
NOTE: Do not use the safety seat if it has not been secured in the car. Place the
child in the safety seat once you have finished assembly.
Thanks to a properly secured headrest, the seatbelt is properly positioned and
your child is provided with comfort and safety.
The headrest can be adjusted in eleven positions. The headrest height must be
adjusted in a way that two fingers fit between child's arms and headrest (fig. 4).
To set the headrest height (fig. 5):
1.
Grab the handle behind the headrest and pull upwards gently.
2.
Adjust a suitable headrest height. When you release the handle, the headrest
will lock in position.
3.
Place the safety seat in the car.
4.
Check the headrest for proper height when the child is in the safety seat. If
the height is wrong, repeat the procedure.
EN
6.
Height adjustment handle
7.
Backrest hinge
8.
ISOFIX fixing arm
9.
Bottle holder
‑ 8 ‑