Network Settings
1. The Network Square Speaker SQ10 uses DHCP as the default IP assignment method.
If you would like to change DHCP to static IP before installation, please first power it on
using a power adaptor or a PoE-enabled network cable. Wait for 30s, then press and
hold the IP broadcast button from the front panel to listen to its IP address. If the DHCP
server is not available or DHCP fails, the default IP address 192.168.1.101 will be used.
2. Insert the IP address in the browser address bar to open the web interface, use default
login credentials, admin/admin, to sign in. Go to Settings -> Network Settings page to
set up static IP.
Installation method -1
Screw Installation
English
4
5
2
04
1
3