Jocel JAT007483 Manual Del Usuario página 21

INSTALLATION
Unpack the heater making sure that all the items are present and that there are no
components left in the box and that the heater head is free from any packing material.
Using the detailed drawing follow the steps to assemble your heater.
Do not connect the heater to the power supply until all the assembly is complete.
Do not connect the heater to the power supply if any of the components or the power cable
is damaged in any way.
If in doubt contact your supplier.
ASSEMBLY
Step 1: Unscrew 6pcs M6*35 screws, separate the cover and weights.
Using 5pcs ￠8 plastic anchors and 5pcs ST4*60 screws to fix the weights to the ground (as
the below holes with tick, using screw plate)
Step 2: Fix the Bottom Tube to the base by using 6pcs 6*30mm bolts. Place the Cover onto
the Bottom Tube.
21