StetSom BRAVO Full 1200 Manual De Usuario página 6

Instalation
Specification of the cables for proper installation:
▪ Power connectors (positive/negative)
▪ Remote connector
▪ Output signal connectors (speakers)
▪ Fuses or circuit breakers
The use of a fuse or circuit breaker is mandatory to protect the system from short
circuits and overload. Install them as close to the battery as possible.
Installation should only be done by qualified professionals with the
product turned OFF.
......................................................................
..............................................................
POWER
6 AWG cables
SPEAKERS
11 AWG cables
Check the minimum
impedance supported by
the amplifier.
........................................
..........................................
70A
Fuse
(maximum
12" of battery)
OF AUXILIARY BATTERY.
6
6 AWG
18 AWG
11 AWG
70A
Radio / Player
STETSOM
REM
REM (remote)
18 AWG cable
Ground
Battery
RECOMMENDED USE