Before Installing - StetSom BRAVO Full 1200 Manual De Usuario

EN-US
Introduction
Thank you so much for choosing a Stetsom product! This amplifier was
developed with cutting-edge technology for those who want high quality
sound from audio systems with one or more speakers or even an audio wall
system.

Before installing

Please read this manual carefully.
▪ All connections must be made with the product turned OFF.
▪ A fuse must be installed between the amplifier and the battery is required
to protect against overcurrent. The fuse needs to be installed as close to
the battery as possible. Choose an appropriate fuse for the amplifier based
on its consumption.
▪ Use the wire recommended in this manual to keep cables from overheating
cables and to obtain maximum power.
▪ Keep the cables as short as possible to increase sound fidelity and avoid
potential power losses.
▪ Route the installation cables as far away as possible from the original
vehicle wiring to prevent interference and noise in your audio system.
▪ Perform the installation on a firm surface in a ventilated and dry place.
▪ Installation should only be done by a qualified professional.
If you have questions , contact the store where the purchase or
installation was done. For more information please contact our
Customer Service: BR +55 18 2104-9412.
2