Figure 4-8: Secureeasysetup Complete - Cisco Systems Linksys WUSB54GC Guia Del Usuario

Compact Wireless-G USB Adapter
3. Press the Cisco logo or SecureEasySetup button on the wireless router or access point. When it turns white
and begins to flash, click the Next button on the Setup Wizard screen. The logo or button will stop flashing on
the wireless router or access point when the Adapter has been successfully added to the network. Repeat
this procedure for any additional SecureEasySetup device.
NOTE: You can only add one SecureEasySetup device at a time.
4. When SecureEasySetup is complete, you may save your configuration to a text file by clicking the Save
button, or print the configuration by clicking the Print button. Click Connect to Network to connect to your
network.
Congratulations! Setup is complete.
To check the link information, search for available wireless networks, or make additional configuration
changes, refer to "Chapter 5: Using the Wireless Network Monitor."
Chapter 4: Setting Up and Connecting the Compact Wireless-G USB Adapter
Setting Up the Adapter
All manuals and user guides at all-guides.com

Figure 4-8: SecureEasySetup Complete

9