Zyxel P-335WT Guia De Inicio Rapido página 14

No configuration changes will be saved to the Prestige until you click Finish.
Click Wizard Setup in the main menu to display the first wizard screen.
1.
Set up your wireless LAN using the following screen.
2.
Select Auto, None, Basic(WEP) or Extend(WPA-PSK) from the drop-down list box as the level of wireless security.
Choose Auto to use WPA-PSK security with a default Pre-Shared Key and proceed to another wireless LAN setup screen
where you can enable OTIST. Choose this option only if your wireless clients support WPA-PSK.
Choose None to have no wireless LAN security configured. If you do not enable any wireless security on your Prestige,
your network is accessible to any wireless networking device that is within range.
Choose Basic(WEP) security if you want to configure WEP Encryption parameters.
Choose Extend(WPA-PSK) security to configure a Pre-Shared Key. Choose this option only if your wireless clients
support WPA-PSK.
The next screen varies depending on which security level you select.
P-335WT
12
System Name is a unique name to
identify the Prestige in an Ethernet
network. Enter a descriptive name.
The Domain Name entry is what is
propagated to the DHCP clients on the
LAN. If you leave this blank, the
domain name obtained by DHCP from
the ISP is used.
Click Next to continue.
Name(SSID) is a unique name to
identify the Prestige in the wireless
LAN. Enter a descriptive name.
The range of radio frequencies used by
IEEE 802.11b/g wireless devices is
called a channel.
Select a channel ID that is not already
in use by a neighboring device.