Advanced Ptz Controls - Lorex LNZ44P4 Serie Manual De Instrucciones

6 Controlling the PTZ camera with LNR / NR Series NVRs
PTZ Controls
1
2
1. Direction keys: Click to pan and tilt the camera. Click SIT to stop the current action.
2. PTZ Trace: Click to activate mouse PTZ Trace mode. You can do the following:
• Click and drag to move the camera.
• Use the scroll wheel to zoom in and out.
• Right-click to exit and return to normal PTZ controls.
3. Zoom/Focus/Iris: Click +/- to adjust the zoom, focus, and iris. Adjusting the camera's iris
settings allow you to control the amount of light that enters the camera's lens. The higher the
iris value, the greater the amount of light that enters the camera's lens.
CAUTION
Adjust the camera's iris settings to match the environment where the camera is installed. Too much light ex-
posure might result in a very bright camera image.
4. Advanced controls: Click to open advanced PTZ controls.
5. Speed: Enter a PTZ speed between 1 (slowest) and 8 (fastest).

6.2 Advanced PTZ Controls

Advanced PTZ controls can be used to save camera positions and cycle through various posi-
tions, and automate camera actions.
To open advanced PTZ controls:
• Click the arrow in the PTZ control window to open advanced controls.
Advanced PTZ controls overview:
1. No.: Click to select the number of the action you want to perform.
2. Not supported.
3. Not supported.
4. Preset: Click to call the selected preset.
#LX400075; r. 4.0/58710/58717; en-US
5
4
3
1
5 7 9
11
4 6
8 10
2
3
16