Presets; Tours - Lorex LNZ44P4 Serie Manual De Instrucciones

6 Controlling the PTZ camera with LNR / NR Series NVRs
5. Not supported.
6. Tour: Click to run the selected tour.
7. Not supported.
8. Pattern: Click to run the selected pattern.
9. Not supported.
10. Not supported.
11. : Click to open the PAN/TILT/ZOOM menu, where you can set up Presets, Tours, and
Patterns.

6.2.1 Presets

Presets will save a camera position for quick retrieval.
To add presets:
1. Click to open the PAN/TILT/ZOOM menu.
2. Click the Preset tab.
3. Under the Preset text box, enter the number of the preset you want to create.
4. Move the camera to the desired position and click Set.
NOTE
Click Del Preset to delete a preset.
5. Right-click to return to the advanced PTZ controls window.
To go to a preset:
• Under No., select the number of the preset you would like to go to and click

6.2.2 Tours

Tours will cycle through a set of presets.
To create a tour:
1. Click to open the PAN/TILT/ZOOM menu.
2. Click the Tour tab.
#LX400075; r. 4.0/58710/58717; en-US
.
17