User Countdown - Tintometer Lovibond TB 300 IR Instrucciones

Mode
Store
Read
Avg
Read
Cal

2.2.3 User countdown

With this function the operator is able to define his own countdown.
19:20:20 15.04.2014
Count-Down
mm : ss
99 : 99
0 2
Count-Down
02:00
Start:
40
Confirming
Menu of instrument settings and further functions
Moving the cursor up resp. down
Storing of displayed test result
Perform a measurement with signal averaging
Perform a measurement
Displaying date and time / user countdown
Perform a calibration
Press ["clock"] key.
The display shows time and date:
Press ["clock"] key.
The display shows:
Either press [ ] key to accept the last used user countdown
or
0 0
press any number key to start entering a new value
The entering comprises two digits each.
Enter minutes and seconds
e.g.: 2 minutes, 0 seconds = [0][2][0][0]
Confirm with [ ] key.
The display shows:
Start countdown with [ ] key.
After countdown has finished the Instrument reverts to the
previous display automatically.
TB300 IR 6 03/2022