Delivery Content; Technical Data - Tintometer Lovibond TB 300 IR Instrucciones

3.2 Delivery content

Standard contents for Turbidimeter:
1 Turbidimeter in plastic case
1 Cap for Turbidimeter
2 Protective caps for connections
1 Rechargeable battery set (7 Ni-MH rechargeable batteries; Type AA; 1100 mAh)
1 Mains adapter, (100 – 240 V, 50 – 60 Hz)
1 Cable for connection to PC
4 Round vials with cap, height 54 mm, Ø 24 mm
1 Beaker cup, plastic, 100 ml
1 Standard T-Cal < 0.1 NTU
1 Standard T-Cal 20 NTU
1 Standard T-Cal 200 NTU
1 Standard T-Cal 800 NTU
1 Cleaning tissue
1 Screwdriver
1 Instruction manual
1 Short manual
1 Guarantee declaration
Please see the General Catalogue for details of available accessories and spare parts.

3.3 Technical data

Display
Serial Interface
Light source
Principle
Range
Resolution
TB300 IR 6 03/2022
Graphic Display (7-line, 21-characters)
serial RS232 for printer- and PC-connection;
9-pin D-sub-mail connector, data format ASCII,
8-bit Data, no parity, 1 start-bit, 1 stop-bit,
baud rate and protocol: adjustable
Pin assignation:
Pin 1 = free
Pin 2 = Rx Data
Pin 3 = Tx Data
Pin 4 = free
Pin 5 = GND
LED = 860 nm and photo sensor amplifier in protected cell
compartment.
Nephelometric (Non Ratio)
0.01 – 1100 NTU
1)
0.01 – 9.99 NTU = 0.01 NTU
10.0 – 99.9 NTU = 0.1 NTU
100 – 1100 NTU = 1 NTU
Pin 6 = free
Pin 7 = RTS
Pin 8 = CTS
Pin 9 = free
51