Standby Mode - universalblue UCPC9901-20 Manual De Instrucciones

STANDBY MODE

Before using the device, turn on the power and press power button
on the side of the device. The display will show the signal
indicating standby mode. In this mode the device does not heat.
If heater is running in a different mode and you wish to set standby
mode, press MODE button . The display will then show the
indicator on the screen.
Press and hold MODE button to set current hour, tMIN button to set
the minutes, and SET to set current day.
SET CURRENT DATE
To set current hour, press and hold MODE button until the display
shows the indicator on the screen.
Now, press and hold MODE button to set the date. Press it till
the day you want is illuminated.
Then press and hold the PROGRAMMER button to set the time.
Press until the time appears.
Once the hour is settled, press and hold the TIMER button to set
the minutes. Press until the minutes you want appear on the screen.
28