universalblue UCPC9901-20 Manual De Instrucciones página 29

HEAT MODE
Press MODE button
many times as necessary until the display shows the indicator
on the screen.
Press TEMPERATURE button
temperature to minimum or maximum heat. The display will show
or depending on the heating position requested.
If you want a different power level, press INCREASE
DECREASE
range of 5º to 40º. The temperature will be shown on the display
with 2 numbers:
• 2 numbers on the left show the current temperature in the
room.
• 2 numbers on the right show the temperature being
programmed.
to switch to heat mode. Press the button as
button to select the desired temperature from a
1. Day
2. Mode
3. Minutes
4. Hour
once or twice to set the
or
29