KEKAI KT1500 Manual De Instrucciones página 18

1- Check the cleanliness of the Reflector and IR-Filament at least once a
month. If necessary, apply cleaning and maintenance instructions.
2- The number of checks may be increased considering the amount of dust in
the environment.
3- Check the deformation of the Reflector, Wire and Frame visually while
cleaning the appliance. In case of any deformation, consult a qualified
technician.
4- Check the power cable and plug visually while cleaning the appliance. In
case of any deformation, consult a qualified technician.
5- It is recommended to change the reflector every 2 years for more efficient
operation.
Cleaning
Attention! Regular and careful cleaning helps your heater to operate efficiently
for many years.
1- Unplug your power cable for your safety before cleaning your appliance.
2- Take out the front grid wire through the inlets on the frame using a slotted
screwdriver.
3- The reflector and filament must be cleaned with a soft cloth, a smooth
brush or cool or dry air. The cloth may be damp but never too wet and the
cleaner should not include any chemicals.
4- Refrain from using cleaning materials likely to damage the reflector
(cleanser etc.).
5- Reinsert the wire grid using a slotted screwdriver.
6. Specifications
Voltage
Frequency
Electric Power
AC220-240V
50/60 Hz
1500W