JANE Montecarlo R1 Instrucciones página 19

6 Adjusting the armrest
6a To adjust the armrest (4), press in the middle (5) and turn it to the
required position. It has three positions.
6a
All manuals and user guides at all-guides.com
MAINTENANCE
Do not expose the upholstery to sunlight for prolonged periods of time,
when the safety seat is not in use cover it up or store it in the boot.
Clean the plastic parts with soap and warm water, and then dry all the
parts thoroughly.
The upholstery can be taken off for washing.
Follow the instructions below:
- Headrest. Release the 2 press studs from the sides, unfasten the strap
on the back and pull the upholstery forwards, then release the two press
studs from the top part.
- Backrest. Unfasten the three straps on the back and the press studs on
both sides and then pull the upholstery forwards.
- Booster seat. Unfasten the press studs on the back, release the elastic
and the two press studs on the front part and then pull the upholstery
from the front.
To replace the upholstery, follow same steps in reverse.
19