General Use - NuWave Brio 7.25Q Manual Del Propietário

INSTRUCTIONS

GENERAL USE

Getting Started
Plug the power cord into an
electrical outlet.
1. Press the Power button
to turn the Brio on and
off and to cancel.
2. Insert your food into
the Base Tray and
slide it into the Brio.
3. Adjust the temperature
and time by pressing
the Up and Down
arrows.
• The default cooking
time and temperature
is 15-minutes at
350F.
4. Press the START/
PAUSE button to
begin cooking.
START/PAUSE
Press the START/PAUSE
button to begin cooking.
To pause cooking, press
the START/PAUSE button
or simply remove the
Base Tray.
• The screen will
display "Open"
when the Base Tray
is removed. It will
continue cooking
once it's closed.
Once the Brio
finishes cooking,
the LED display will
show "End" and beep
three times.
Mute and unmute the
beep sounds. To mute the
beep sounds, press and
hold the SEAR + STAGE
buttons for 1 second. The
Brio will remain mute until
it is unmuted. Press SEAR
+ STAGE for 1 second
again to unmute.
Adjust the cooking
temperatures
1. To set a different
cooking temperature,
press the Up and
Down arrows above
and below the
temperature icon.
• The temperature will
adjust in 5-degree
increments between
50F and 400F.
2. You can quickly adjust
the temperatures by
holding down the Up
and Down arrows.
Note: The cooking
temperature can be
adjusted at any time
before or during the
cooking process. The
current set temperature
will be displayed. To
display the time, press the
TIME button.
nuwavenow.com nuwavenow.com
13 13