Putting Into Use; Useful Hints For Use - Jocel JFRI011190 Manual De Instrucciones

Putting into use

Before using for the first time
1. Remove the packaging. Then take the lid off the deep fat fryer. In the deep fat fryer you will
find a frying basket. Take all objects out of the fryer.
2. It is highly recommended to clean the lid, casing, container and frying basket as described
in Cleaning.
3. Please pull the connecting cable out of the cable compartment.
Electrical connection
• Make sure that the iron voltage (see name plate) and the line voltage match.
• The mains plug should only be inserted into a correctly installed 220-240V~50/60Hz socket
with earthing contact.
Connected Wattage
The total power consumption of this device can be up to 2000W. With this connected load a
separate supply line.
CAUTION: OVERLOAD:
• If you use extension leads, these should have a cable cross-section of at least 1.5 mm.
• Do not use any multiple sockets, as this device is too powerful.

Useful hints for use

1. Always remove the food remaining in the oil (e.g. pieces of French fries). After the device has
been used several times you should change the oil.
Use high quality frying oil or frying grease.
2. Fats and oils must be heated to high temperatures.
Do not use margarine, olive oil or butter: they are not fit for frying, because they start to
smoke already at low temperatures.
We recommend the use of liquid frying oil.
-30-