Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Deep frying fat container
• In order to change the oil, pull out the deep frying fat container and pour the oil out at the
side.
• Clean the deep frying fat container, the lid and the housing with a damp cloth and household
detergent if necessary. Please do not immerse in water.
• The deep frying basket can be cleaned in the usual way in soapy water.
Housing
Clean the housing after use with a slightly damp cloth.
Troubleshooting
Device is not working
Troubleshooting:
• Check the mains connection.
• Check the position of the thermostat.
Other possible causes:
The device is fitted with a safety switch (7).
This prevents the heater being switched on accidentally.
Check that the control element is correctly in place.
Overheating Protection
• If you should accidentally switch on your deep fat fryer when there is no oil or fat in it the
overheating protection is automatically turned on. The appliance is no longer ready to be
used. Unplug the deep fryer.
• Only after the device has been left to cool down completely should the "RESTART" button (8)
on the rear of the control element be operated in order to use the deep fat fryer again. For
this you should use a plastic or wooden object that is the least 4 cm long.
Overheating Protection
• If you should accidentally switch on your deep fat fryer when there is no oil or fat in it the
overheating protection is automatically turned on. The appliance is no longer ready to be
used. Unplug the deep fryer.
• Only after the device has been left to cool down completely should the "RESTART" button (8)
on the rear of the control element be operated in order to use the deep fat fryer again. For
this you should use a plastic or wooden object that is the least 4 cm long.
- 33 -
Publicidad
Tabla de contenido
