Adjusting The Integrated Straps; Reclining The Seat - JANE IKONIC R Manual De Instrucciones

•If it is not, unfasten the buckle and fold the crotch part fully forward,
this releases the belts. .b
3
•Lengthen the belts by pulling the shoulder straps.
•For ease of installation, position the buckle ends on the elastic strips.
.d
3
•Position the child in the seat making sure they are sitting well back
in the seat with their back straight. Bring the top ends of the buckle
together. .e
3
•Lift the central buckle, insert the top parts into the clasp and press
until you hear it click locked.
•Check that the "Holmbergs RollFix
any excess belt, if not, help by pushing the belts upwards.
•Turn the seat to the travel position.
! WARNING: The forward facing position is not recommended at
all for babies of less than 76 cm tall or under 15 months old.
H_ADJUSTING THE INTEGRATED
STRAPS
The height of the shoulder straps should be adjusted as the child grows.
With the child sitting correctly in the safety seat check the shoulder straps
are at the right height. They should be just above the child's shoulders.
IKONIC R has 5 shoulder strap positions, when adjusting the height the
headrest will move.
To change the height follow the steps below:
.c
3
.f
3
TM
" belt retractors have retracted
.h
3
Pull the ring found on the back of the headrest (4), this will unlock the
position of the headrest.
Slide the headrest (3) to the correct position for the child and release
the ring. Move the headrest until you hear it click when locked into
place. Pull the headrest to make sure it is secure.
!
WARNING: Adjust the height as the child grows.
.g
3
I_RECLINING THE SEAT
The IKONIC R safety seat can be reclined using a lever on the front part
of the seat (10). It has 4 positions.
To recline the seat, pull the lever and slide the seat to the required
position.
5
.a
4
.b
4
23
EN