Cleaning And Storage - Parkside PBZS 5 A1 Traducción Del Manual De Instrucciones Original

♦ Switch on the drill to drive the product and pump the
liquid . Do not leave the product unattended . Make
sure that the drill is running clockwise . If the speed of
the drill is adjustable, you can use it to regulate the
flow rate .
♦ Switch off the drill after you have finished pumping
the liquid .

Cleaning and storage

ATTENTION! PROPERTY DAMAGE!
► Do not use aggressive or abrasive cleaning agents,
as they can damage the surfaces of the product .
♦ Clean the surfaces of the product with a soft, dry cloth .
For stubborn dirt, use a slightly damp cloth with a little
mild detergent .
♦ Store the product in a clean, dry location out of direct
sunlight .
PBZS 5 A1
GB │ MT
│
43 ■