Warnings and Cleaning
Enviromental Ward
CE Mark Compliance
All manuals and user guides at all-guides.com
CAUTION: many of the components used in this device are sensitive to electrostatic charge.
In case of manipulation of the connection cables, disconnect the power supply and avoid direct contacts
with the connector terminals.
When handling electronic components, to eliminate any static electricity touch a grounded surface. If
possible, wear a grounding arm band.
Failure to comply with these warnings could cause permanent damage to this device.
To clean the device use a soft cloth either dry or moistened with a little detergent. Never use any type of
solvents, such as alcohol or gasoline, to avoid damaging the finish.
CAUTION: risk of explosion if batteries are replaced by an incorrect type. Dispose of used batteries
according to the instructions.
The batteries of this equipment must be recycled by a company in charge of this activity, a company
qualified for the disposal of dangerous materials or by using containers provided for the separate collection
of worn out batteries.
This equipment may not be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed
of correctly, you will help prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office, your household waste
disposal or the dealer where you purchased this product.
Hereby, Aethra S.p.A. declares that this device complies with essential requirements and other relevant notes
of R&TTE Directive 1999/5/EC.
The declaration of conformity maybe obtained from:
Aethra S.p.A. - Via Matteo Ricci, 10 - 60020 Ancona - Italy
www.aethra.com - info.aethra@aethra.com
EN 55022 Class A
This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may required to take adequate measures.
FCC15 Classe A
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.