Making A Call - Doro 914c Manual Del Usuario

Batteries
In order for Caller ID, memory etc. to function, the device needs four type AAA 1.5V batteries.
Only use high quality batteries.
When the batteries are running low, the
1. Unplug the telephone cable and remove the cover.
2. Insert the batteries according to the markings for plus and minus terminals.
3. Replace the battery cover.
The display
In standby mode the date and time is indicated on the display, as well as the number of
new phone numbers and the total number of phone numbers that have been stored in the
Caller ID memory.

Making a call

Regular dialling
1. Pick up the handset.
2. Enter the desired number.
Dialling with correction function
If necessary, the telephone number you have dialled can be changed before it is connected.
1. Enter the required number. Mistakes can be deleted using 0 .
2. Pick up the handset, the number is dialled.
Call Back
Pick up the handset. Press r to redial the most recently dialled number.
Volume control
The handset volume may be adjusted during a call with
Mute button
Press and hold to disable the handset microphone, release
z
Ring signal
Ring volume
e
Ring melody
Ringer tone (915c)
n
English
symbol will light up.
.
z
2
to reconnect the microphone.