Graymills CLEAN-O-MATIC COM304 Instrucciones De Operacion Y Mantenimiento página 14

Graymills manufactures a wide variety of parts cleaning supplies and accessories for use with your
Clean-O-Matic. Contact your Graymills Jobber or Distributor for more information on the items listed
below. (See Catalog GM100 for additional items)
Parts Cleaning Brushes
Graymills parts cleaning brushes are specifically designed for tough parts cleaning work. The crimped
nylon fibers outwear ordinary brushes and won't ball up, flare out, or get flabby.
3B-G Standard Nylon Brush — 2-1/2" nylon bristles for maximum durability.
Double Brush — 2-1/2" nylon bristle brush for broad cleaning at one end of the tapered handle
5D
and a 1-1/2" fine brush at the other.
Flow-Thru Brush – flushes parts as they are cleaned. Solvent flows through the core of the
6A
handle. Manufactured with a 2' connecting hose, 2·1/2" nylon bristles, and a rubber connector
which slips over the nozzle of the flexible metal hose.
7A Flat Angular Flow-Thru cleaning brush with polyester bristles; can attach to pump nozzle with
included hose. Plastic Handle.
8A Round Angular handle cleaning brush with polyester bristles; can attach to pump nozzle with
included hose. Plastic handle.
Parts Cleaning Accessories
Extra work shelf — Model 804 only.
L-4
Extra work shelf — Model 804 only; solid metal.
L-4S
Extra work shelf — Models 304, 504.
L-5
Extra work shelf — Models 304, 504, and 604; solid metal.
L-5S
External Drain Shelf — 16" x 18", hooks into position at left side of the tank to permit solvent to
L-6
drain back.
For all models
432-36376 Sludge Tray - For use with 304, 504 and 604 Series (2 required) or 804 Series (3 required)
432-36664 Sludge Tray - For use with 904 Series (2 required)
Parts Basket — 16-gauge metal bottom and sides, solid metal ends. Measures 13" L x 12" W x
L-8
5" H. Fits on L-6 drain shelf.
Parts Basket — 15-gauge frame with metal sides and bottom. Measures 32" L x 17" W x 5" H.
L-9
Can be supported above liquid level for parts draining by special pullout supports.
Parts Basket — Same as L-9 with the addition of a lifter bar for use with chain hoists.
L-9L
Solvent Savers
Oil and Grease Removal (Packed two/carton)
SS-11 7" diameter x 11" long–includes one connecting hose
SS-18 7" diameter x 18" long–includes one connecting hose
Oil and Grease Plus Particulate Removal (Packed two/carton) In addition to special absorbent
materials, it contains a 5-micron filter cartridge that filters particulate from the solvent prior to oil and
grease absorbing stage.
SSC-11 7" diameter x 11" long–includes one connecting hose
SSC-18 7" diameter x 18" long-includes one connecting hose
Solvent Saver Hanging Bracket-Stainless Steel bracket holds filter out of way on inside of parts washer.
SS-BRAC 12" long x 9" deep X 8" high
795-93851
ACCESSORIES
14 of 49 12/15/21