Controls And Functions Front Panel; Rear Panel - FONESTAR MA-245Z Manual De Instrucciones

EN
DESCRIPTION
- PA amplifier.
- 4 selectable loudspeaker zones with independent volume control.
- Phantom power supply and priority.
CONTROLS AND FUNCTIONS
FRONT PANEL
1.- INPUT 1-4 and AUX: controls that regulate the volume of inputs 1 to 4 and the aux input.
2.- BASS: reinforces or attenuates the bass frequencies ±10 dB.
3.- TREBLE: reinforces or attenuates the treble frequencies ±10 dB.
4.- MASTER: control that regulates the general output volume of all the inputs.
5.- OUTPUT LEVEL: LED indicators for the output signal level. It regulates the individual volume controls
of the inputs or the general (MASTER) output volume control so that the level does not exceed the green
LED indicators. The red LED indicators indicate saturation or a distorted signal which could damage the
loudspeakers or the amplifier.
6.- ZONE SELECTOR (ZONE 1 to ZONE 4): there are 4 individual zone controls and one general control.
The loudspeaker line of a zone can be connected or disconnected independently, simply by pressing
the corresponding zone button (ZONE 1-ZONE 4). Turn the respective volume control of each zone in
a clockwise direction to increase the volume and in an anti-clockwise direction to reduce it. When the
ALL button is pressed, the 4 zone controls work simultaneously and the output signal volume will be at
it's maximum setting.
7.- POWER: amplifier on/off switch.

REAR PANEL

1.- Ventilation grille: to ventilate the output stage.
2.- 115V/230V: power supply voltage selector.
- 2 -