Maintenance; Limpieza De Filtros - Truper ASP-5S Manual

Maintenance

Limpieza de filtros

• After using the blower, examine the ventilation slots at
the bottom. Remove any debris or particles that have
lodged in them.
• Clean the filters when they show accumulation of dust
and dirt.
• Clean the filters with soapy water and allow them to dry
completely before reinstalling them in the filter cage.
Check the bearing before reuse. In case
ATENCIÓN
of damage, go to a
Center for replacement.
Cleaning
• After each use, remove the residue from the container
and hose.
• Always keep the ventilation openings of the motor cover
free and clean. Blow out regularly with compressed air or
clean with a brush.
Service
• Tools should only be serviced at a
Authorized Service Center. Service and maintenance by
unqualified persons can be dangerous and may result in
personal injury and void the product warranty.
• When servicing a vacuum cleaner, ask that only genuine
replacement parts be used. Use of unauthorized parts, or
failure to properly maintain may create a risk of
electrocution or injury.
Authorized Service
Carbon brush replacement
• The carbons should be checked periodically, and always
be replaced by a
Center when they have worn out.
• After they have been replaced, ask to inspect if the new
carbons can move freely in the carbon holder and request
that the tool be turned on for 5 minutes to match the
contact of the carbons and commutator .
• Only genuine
specifically designed with the proper hardness and
electrical resistance for each type of motor, should be
used. Out of specification carbons may damage the motor.
• When changing carbons, always replace both carbons.
Authorized Service
eplacement carbons,
9
ENGLISH