Disposal Instructions - Goobay 60217 Manual De Instrucciones

3in1 Wireless Charger
EN
Chargeur sans Fil 3en1
FR
Do not operate a device if it is not in working order. In such ca-
ses, it must be secured against unintentional further use.
• Use product, product parts and accessories only in per-
fect condition.
• In case of questions, defects, mechanical damage, trouble
and other problems, non-recoverable by the documentati-
on, contact your dealer or producer.
• Avoid stresses such as heat and cold, moisture and direct
sunlight, microwaves, vibrations and mechanical pressure.
Not meant for children. The product is not a toy!
• Secure packaging, small parts and insulation against ac-
cidental use.
Heat storage
Heat is generated during inductive charging.
• Make sure that there are no metal parts on the back of
your device (e.g. metal cover, metal plate for magne-
tic holder).
Metal heats up strongly in the induction field and can cause
damage to the product or your end device.
• Do not cover the product.
Magnetism
The product contains magnetic materials.
• Consult a medical professional before you use the pro-
duct to make sure it is compatible with implanted medi-
cal devices.
• Maintain a minimum distance of 20 cm from medical de-
vices.
• Do not operate and/or store the product near credit, debit
or other bank cards.
2 Description and function
2.1 Product
The product is an inductive charging station including adapter
cable for wireless charging of up to 3 devices simultaneously.
It supports the Qi standard with up to 15 W power for smart-
phones, 3.5 W for smartwatches and 5 W for headphones.
2.2 Scope of delivery
3in1 Wireless Charger, Adapter cable, User Manual
2.3 Operating Elements
See Fig. 1.
1 Charging area smartphone
2 Status LED
3 Charging area smartwatch
4 Charging area headphones
3 Intended use
We do not permit using the device in other ways like
described in chapter „Description and Function" or in
the „Safety Instructions". Use the product only in dry
interior rooms. Not attending to these regulations and safety
instructions might cause fatal accidents, injuries, and dama-
ges to persons and property.
4 Preparation
1. Check the scope of delivery for completeness and in-
tegrity.
2. Compare the specifications of all used devices and ensu-
re compatibility.
5 Connection and operation
1. Connect the charger to a suitable power adapter via the
adapter cable.
A power adapter is not included in the scope of delivery. The
power adapter requires a minimum power of 27 W and must
support the PD3.0 or QC4+ standard so that all functions can
be used without restriction.
2. Plug the power adapter into a free and easily accessi-
ble socket.
As soon as the charger is connected to a power source, the
status LED (2) flashes green and blue and then goes out.
3. Place your devices on the charger as shown in Fig. 2.
You can use all three charging areas at the same time.
When a device is placed on the smartphone charging
area (1), the status LED lights up green. When a device is
placed on the headphone charging area (4), the status LED
lights up blue. If both charging areas are used at the same
time, the status LED lights up blue.
If your device is placed incorrectly or a metallic object is de-
REV2022-04-26 Subject to change without notice. |
V1.0aw Sous réserve de modifications.
5 USB-C™ socket
6 USB-A plug
7 USB-C™ plug
tected in the charging area, the status LED flashes blue.
4. Remove your devices from the charger when they are ful-
ly charged.
6 Maintenance, Care, Storage and Trans-
portation
The product is maintenance-free.
NOTICE!
• Only use a dry and soft cloth for cleaning.
• Do not use detergents or chemicals.
• Store the product out the reach of children and in a dry
and dust-protected ambience when not in use.
• Store cool and dry.
• Keep and use the original packaging for transport.

7 Disposal instructions

According to the European WEEE directive, electrical
and electronic equipment must not be disposed with
consumers waste. Its components must be recycled
or disposed apart from each other. Otherwise conta-
minative and hazardous substances can damage the
health and pollute the environment.
As a consumer, you are committed by law to dispose electrical
and electronic devices to the producer, the dealer, or public
collecting points at the end of the devices lifetime for free.
Particulars are regulated in national right. The symbol on the
product, in the user manual, or at the packaging alludes to
these terms. With this kind of waste separation, application,
and waste disposal of used devices you achieve an important
share to environmental protection.
WEEE No: 82898622
8 EU Declaration of conformity
Hereby Goobay®, a registered trademark of
Wentronic GmbH, ensures that the mentioned
radio system type is conformed to Directive
2014/53/EU. The full text of EU Declaration of Conformity is
available at the following Internet address:
https://www.wentronic.com/en/
1 Consignes de sécurité
Le mode d'emploi fait partie intégrante du produit et comprend
d'importantes informations pour une bonne installation et une
bonne utilisation.
• Lisez le mode d'emploi attentivement et complètement
avant de l'utiliser.
Le mode d'emploi doit être disponible à des incertitudes et
transfert du produit.
• Conservez soigneusement ce mode d'emploi.
• Ne pas ouvrir le boîtier.
• Ne modifiez pas le produit et les accessoires.
• Pas court-circuiter des connexions et circuits.
Un appareil défectueux ne doit pas être mis en service. Il doit
au contraire être protégé contre toute utilisation involontaire.
• Utilisez le produit, pièces et accessoires des produits uni-
quement en parfait état.
• En cas de questions, les défauts, les dommages mécani-
ques, des ingérences et d'autres problèmes, non récupé-
rables par la documentation, contactez votre revendeur ou
le producteur.
• Éviter des conditions extrêmes, telles que la chaleur ex-
trême et froid, l'humidité et de la lumière directe du so-
leil, ainsi que microondes, des vibrations et de la pressi-
on mécanique.
Non destiné à des enfants. Le produit n'est pas un jouet !
• Sécuriser l'emballage, petites pièces et l'isolation contre
l'utilisation accidentelle.
Accumulateur de chaleur
De la chaleur est générée pendant la charge par induction.
• Assurez-vous qu'il n'y a pas de pièces métalliques à l'ar-
rière de votre appareil (par exemple, un couvercle métall-
ique, une plaque métallique pour le support magnétique).
Le métal se réchauffe fortement dans le champ d'induction et
peut endommager le produit ou votre appareil final.
• Ne couvrez pas le produit.
- 3 -
Pillmannstraße 12 | 38112 Braunschweig | Germany
60217
Material damage
Goobay® by Wentronic GmbH