Time Adjustment - Trevi EC 889 Guía De Uso

ENGLISH
1 2 3 4
12 13
INSTALLATION
Insert two "AAA" batteries in the compartment (11) on the back of the device,
respecting the indicated polarity.
Insert the plug of the power cable into a 230V
flash until the time is set.

TIME ADJUSTMENT

1. Hold down the CLOCK SET button (4) for a long time until the time starts
flashing;
2. Press the HOUR button (6) several times to set the current time;
3. Press the MIN key (7) several times to set the current minutes;
4. Press CLOCK SET button (4) to confirm.
ALARM ADJUSTMENT AND ACTIVATION
1. Press the AL1 button (9), the display, indicating the alarm time, and the
alarm 1 indicator LED (12) will begin to flash;
2. Press the HOUR button (6) several times to adjust the alarm time;
3. Press the MIN key (7) several times to set the minutes of the alarm;
4. Press the AL1 button (9) to confirm the setting.
The alarm indicator (12) will light up on the display.
5. To set ALARM2 follow steps 1 to 4 by pressing the AL2 key instead of AL1.
To view the alarm set time or activate the alarm, press the AL1 (9) or AL2 (10)
button and wait a few seconds to return to the normal time display.
To disable the indicator (12) or (14) press the Alarm1 or Alarm2 button twice.
SNOOZE FUNCTION AND ALARM DEACTIVATION
1. During the alarm sound, press the SNOOZE button (5) to temporarily stop
the alarm, the alarm indicator (12/24) will begin to flash. After 9 minutes the
alarm will resume sounding.
2. During the alarm sound, press the AL OFF button (1) to permanently stop
10_
11
5 6 7 8 9 10
1415
COMMANDS DESCRIPTION
1. AL OFF button, alarm switch Off
2. NAP Button
3. DIMMER button, display brightness
adjustment
4. CLOCK SET button
5. SNOOZE button
6. HOUR button, hour adjustment
7. MINUTE button, minutes adjustment
8. Speaker
9. AL1 button
10. AL2 button
11. Battery compartment (on the back)
12. Led Alarm 1 indicator
13. LED Display
14. Led Alarm 2 indicator
15. Led indicator NAP function
50Hz socket; the display will
EC 889