Important Safety Instructions - Anker A1641 Manual De Instrucciones

Tabla de contenido

Publicidad

EN
Flashing white
Solid white
Wireless Charging
Indicator
Flashing white quickly
Off
Flashing white
Battery Level Indicator
Solid white
Off
Note: When your Magnetic Battery exceeds the temperature limit, the battery
level indicator will turn off. Let it cool down before use.
• This wireless charger is not compatible with non-MagSafe phone
cases, such as Otterbox Defender cases.
T
• • Do not use an adapter with an output of 5V/1A (5W) or less.
• • Wireless chargers make charging more convenient than wired
chargers, but confined by current wireless technology, their
charging speed is slower than that of wired chargers.
• • High temperatures will reduce charging speed and restrict power,
which is something that happens to all wireless chargers. It is
recommended that you charge your device in environments with
temperatures below 25°C / 77°F.
• • Both the protective phone case and the position of your device on
the wireless charger will affect the charging speed. The farther it
is placed from the center of the wireless charger, the slower the
charging speed will be.
01
LED Indicator
Wireless charging
activated
Charging wirelessly
Metal or abnormal objects
detected
Wireless charging off
Battery input/output
Showing the current
battery level
No battery power

Important Safety Instructions

When using this product, basic precautions should always be followed,
including the following:
1) Store the product in a cool and dry place.
2) Leaving a battery in an extremely high temperature surrounding environment
that can result in an explosion or the leakage of flammable liquid or gas.
3) Use of a power supply or charger not recommended or sold by the product
manufacturer may result in a risk of fire or injury to persons.
4) Operating temperature should be between 0°C to 25°C / 32°F to 77°F.
5) Do not disassemble the product. Take it to a qualified service person when
service or repair is required. Incorrect reassembly may result in a risk of fire or
injury to persons.
6) If the product is not used for long periods of time, you should charge and
discharge it once every three months.
7) When charging a device, the product may feel warm. This is a normal
operating condition and should not be a cause for concern.
8) In normal conditions, the battery performance will decline over several
years.
9) Disposal of a battery into fire or a hot oven, or mechanically crushing or
cutting of a battery, that can result in an explosion.
10) Do not clean the product with harmful chemicals or detergents.
11) Misuse, dropping, or excessive force may cause product damage.
12) When disposing of secondary cells or batteries, keep cells or batteries of
different electrochemical systems separate from each other.
13) Be aware that a discharged battery may cause fire or smoke. Tape the
terminals to insulate them.
14) A battery subjected to extremely low air pressure that may result in an
explosion or the leakage of flammable liquid or gas.
02

Publicidad

Tabla de contenido
loading

Tabla de contenido