Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
4
USB INTERFACE: Connection for the USB-C Cable or for connection to other devices.
Also see sections "Charging" and "Connecting approved accessories".
5
KEYPAD
6
FUNCTION KEY: Optional function - function can be assigned via Button App (system
integrated).
7
ISM INTERFACE: Connection for approved accessories. Also see section "Connecting
approved accessories".
8
FRONT CAMERA
9
SOS KEY: A long press of the SOS key sends an emergency call to a pre-saved emer-
gency number (only in connection with a Lone Worker Protection app).
10
TOUCHSCREEN
11
E YELET: Eyelet for hand strap.
12
BACK CAMERA
13
LED FLASH
14
CHARGING CONTACT
15
MICROPHONE: Noise cancelling microphone/hands-free microphone.
PREPARATION
The device has two slots for one SIM card each and one slot for a
microSD card up to a size of 128 GB. The slots are located in the bat-
tery compartment and are marked "SIM 1", "SIM 2" and "microSD".
Insert the SIM card into the slot.
Insert the microSD card into the slot provided.
Place the battery in the battery compartment.
Hand-tighten the screws using the Torx Screwdriver provided.
Check that the battery is seated correctly and securely.
SWITCHING ON
Press and hold the on/off key for about 3 seconds.
When turning on the device for the first time, follow the instructions on the screen.
Enter the device or SIM PIN when the input dialog for the device or SIM PIN appears after
switching on.
If you have inserted two SIM cards, select a favorite card. Information on operating the
device can be found at www.isafe-mobile.com/en/support/service under the menu item
"FAQ".
EN
5
Publicidad
Tabla de contenido
