Toshiba RAC-WK1823ESCWRU Manual De Instrucciones página 18

C
Window Sash Frame
B
A
A. 3/4" (or 1/2") Long Hex Head Screw
B. Left-Hand Accordion Panel Frame
C. Window Sash Frame
Weather seals
Weather seal
A
6. Install Window Sash Seal and Safety Lock
Fig. 19
Window Sash
Seal
Page 18
Fig. 17A
3/4" (or 1/2" )
long Hex-head
screw
Fig. 18
Fig. 18A
A. 3/4" (or 1/2") long
hex head screw
Safety Lock
D. Use a 3/32" drill bit to drill a starter hole
through the middle hole of the top rail into
the window sash frame. Drive one 3/4" (or
1/2") HEX-HEAD locking screw through the
hole just drilled as shown (Fig. 17A).
E. Extend the accordion panels out against the
window frame.
F. Use a 1/8" drill bit to drill a starter hole
through the hole in the top leg of each
accordion panel frame into the window sash
(Fig. 18 and Fig. 18A). Connect with one 3/4"
(or 1/2") long hex head screw.
G. Attach the Lock Frames to the window sill
using two 3/ 4 (19mm) screws (Fig.18B) (on
some models).
A. Trim sash seal to fit window
Fig. 19A
width. Insert into space
between upper and lower
sashes (Fig. 19).
3/4" (or 1/2" )
B. Attach right angle safety
Long
lock (Fig. 19A).
Hex-head
Screws
Fig. 18B
Fig. 18B
User Manual