FlexibleSling
Instructions for use - English
Undivided leg support
Divided leg support
FlexibleSling is pliable and flexible around the body and provides a feeling of security. It is available in three models; one
with divided leg supports, one with undivided leg supports and one with undivided leg supports and commode opening.
FlexibleSling is designed to give a lot of support and to adapt to the shape of the patient's body. After use, it can be left
in the wheelchair, moulded seat or similar.
SystemRoMedic includes a wide range of functional, comfortable, high-quality slings that can be adapted for different
types of lifting and for patients with different needs. The choice of model and material depends on the patient's needs
and the transfer situation.
Functional inspection
Visual and mechanical inspection
Check the condition and function of the sling regularly. Always inspect the product after laundering. Check to ensure that
seams and material are free from damage. Check to ensure that fabric is not worn or faded. Apply load to the device
and check to ensure that clasps, handles, etc. withstand heavy load. If there are signs of wear, the product must be
discarded.
Always read the manual
Always read the manuals for all assistive devices used during a transfer.
Keep the manual where it is accessible to users of the product.
Do not leave the patient unattended during a transfer situation.
To prevent discomfort and the risk of the patient sliding out of the sling, trial fit the sling carefully.
First, apply the sling's back loops to the slingbar, and then apply the leg support loops.
Use a slingbar that has been tested.
Note that there may be a risk of the patient tipping forward when a sling with standard (not separate) leg supports is used.
The lowest allowable safe working load always determines the safe working load of the assembled system.
Always check the safe working loads for the lift and accessories before use.
Contact your dealer if you have any questions.
I F U
3