Keep Warm Function; Standby Mode; Memory Function - Krups BW760D51 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

TO BOIL THE WATER
2 options:
– You can start boiling water at default temperature (93°C /200° F) by pressing
the START/STOP Button.
NOTE: To go back to default temperature, press and hold the START/STOP
button for 2 second.
– You can also adjust the kettle to your desired temperature (from 160°F (71°C)
to boil
quickly, press and hold the + or - button.
„ Once the temperature has been chosen, press the START/STOP button to start the
boiling cycle. The LED button will start flashing in RED, the current water temperature will
be displayed and gradually increase until it reaches the desired temperature.
„ After the water reaches the programmed temperature, the LED button will switch to solid
red and you will hear a long beep sound. Your kettle will then switch to keep warm function.
NOTE: To stop the cycle after it has started, press the START/STOP button once.

KEEP WARM FUNCTION

„ Your kettle has a default KEEP WARM function (fig 10), that maintains the water at the
previously set temperature for 30 minutes.
NOTE: After 30 minutes the display will turn off automatically and you will hear a long beep
sound indicating your kettle is in standby mode.
TIMER:
„ Your kettle has a count-up timer function that you can use during the keep warm mode.
To start/stop the count up on your display, press the TIMER button. Once stopped, the
display will go back to temperature display.
NOTE: The timer can count up to 8 minutes.

STANDBY MODE:

„ Unit will turn off automatically and switch to STANDBY mode at the end of the KEEP WARM
cycle or if no buttons are pressed for 1 minute.
„ To wake your kettle, make sure the kettle is on the base, then press any button.

MEMORY FUNCTION:

„ While on the base, your kettle has a memory function that will display the last temperature
set before the STANDBY mode.
NOTE: If your kettle is new, the default memorized function is 200° F (93°C).
SWITCH BETWEEN CELSIUS & FAHRENHEIT:
„ Press both "+" and "-" at the same time to switch between Celsius and Fahrenheit.
14
(100°C /212°F)) by pressing the + and - buttons. To scroll

Publicidad

Tabla de contenido
loading

Tabla de contenido