Dyna-Glo DG250P-D Manual De Instrucciones página 7

ASSEMBLY INSTRUCTIONS
3. Insert the posts on the bottom shelf (K) into the
holes located on all four legs.
Note: The position of the holes on the top of each
leg assembly (F) should be facing each other.
4. Attach the leg connecting plate (N) onto each side
of the leg assembly using four M6x45 bolts (AA)
and four M6 nuts (EE) per side.
Hardware Used
M6 x 45mm
AA
Bolt
EE
M6 Nut
x 8
x 8
7
3
F
4
N
AA
K
EE