Safety Warnings & Instructions - BWT BC Serie Manual Del Usuario

Ocultar thumbs Ver también para BC Serie:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
SAFETY WARNINGS & INSTRUCTIONS
Information contained in this Instruction Manual will help you operate the item safely,
protect yourself and others from hazards, and prevent damage to the device and other
property.
SAVE THESE INSTRUCTIONS
WARNING!
-
This is not a TOY. Children should be kept out of reach from this pool
vacuum and its accessories.
-
Never allow children to operate this product.
-
This appliance is not intended for use by persons with reduced physical,
sensory, mental capabilities, or a lack of experience and knowledge,
unless they are given supervision or instructions concerning the safe use
of the appliance and understand the hazards involved by a person
responsible for their safety.
-
Children must not play with this product.
-
Cleaning and user maintenance must not be carried out by children.
-
Make sure the pool vacuum is fully immersed in water before initiating
operation. The minimum water level required to operate the pool vacuum
must cover the entire pool vacuum. Operating the pool vacuum when it
is not immersed in the water correctly could damage the unit and void
the warranty as a result.
-
Maximum operating depth in water is 3 meters (9.8 ft.).
-
Operating water temperature: 5˚C (41˚F) –35˚C (95˚F).
-
Detachable supply unit (external adaptor).
-
The pool vacuum is only to be recharged with external adaptor and
charging cable delivered with this product.
-
For the purposes of recharging the battery, only use the detachable
supply unit (external adaptor model number: DSS12D-0841000-B /
DSS12D-0841000-C / DSS12D-0841000-D/ LX084100U) that provided
with this pool vacuum to charge the battery.
-
Connect the external adaptor to a power source through a residential
current device (RCD) / a ground fault circuit interrupter (GFCI). If in doubt,
consult a qualified professional electrician.
-
Do not use this pool vacuum if any damage is detected.
-
Replace damaged parts with ones that are certified by the distributor or
manufacturer.
-
Turn off the power, disconnect the external adaptor from the power
source, and unplug the external adaptor from the charging cable before
detaching the pool vacuum from the charging cable.
-
Disconnect the pool vacuum from the supply mains and make sure the
pool vacuum is powered OFF prior to servicing it such as cleaning the
filter bag.
-
Do not attempt to replace the installed rechargeable Li-ion battery pack.
-
DO NOT handle the pool vacuum, external adaptor and charging cable
1/155

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bc40

Tabla de contenido