BWT BC Serie Manual Del Usuario página 8

Brush assembly
Align and insert all brushes into the notches at the underside of the pool vacuum
NOTE: the 2 brushes provided are not interchangeable. Select the brush according to the
curvature and shape of the notch. Ensure the brushes are fitted properly.
While holding the cord, press on the cord fastener and
push it under the flange.
TIPS: To secure the filter bag, when pushing the cord
fastener under the flange, pull one cord instead of two
cords as shown in diagram.
Lift up the bag to ensure it is totally secured before
deploying the pool vacuum into water.
7/155