Cleaning And Sterilising Instructions Of The Difrax S-Bottle; Choosing The Size Of The Bottle Base - Difrax S Instrucciones De Uso

cleaning vinegar is too aggressive. Place the heating element
the pan and leave to soak for 15 minutes. After descaling heating
element , rinse thoroughly in cold water
C
After cleaning, make sure all parts are completely dry
before re-assembling them
Transport and storage of the Difrax S-bottle
If the S-bottle warmer is transported or stored
away (for a long time), ensure that the parts are
slotted together, and use the top-up cap
to protect and hygienically seal the heating
element
C
Use the protective cap to seal the bottom of
F
the heating element so that the contact rings
C
cannot be damaged and no dust/crumbs can clog
up the element
Cleaning and sterilising instructions of the
Difrax S-bottle
Before first use clean the S-bottle. Clean before each use. Separate
all parts of the bottle and thoroughly rinse all parts immediately after
each feed. To keep the Difrax bottle in optimum condition, use a
bottle brush to clean in all the ridges, including the screw ring, and
wash with a mild detergent. just rinsing with water without
in
C
A
12
sterilising will not suffice, as even the smallest speck
of food can easily lead to a build-up of bacteria that
can be harmful to your child. Never use chemically
aggressive or anti-bacterial cleaning agents, as these
can damage the product. Damaged parts should be
thrown away immediately
After washing with a mild detergent, we
recommend cleaning the bottle in the dishwasher.
Always place the bottle parts in the top rack of the
dishwasher and wash at a maximum temperature
of 55 degrees.
Should you wish to sterilise the Difrax bottle, the sterilising
instructions of the (Difrax) microwave steriliser should be carefully
observed. Alternatively, sterilise by submerging in boiling water for
3 minutes. For sterilisation you have to take apart all components.
Otherwise there is a different reaction of the material which can
cause deformation

Choosing the size of the bottle base

The size of the bottle base depends on the size of the S-bottle For
sterilization you have to take apart all components.
White bottle base for S-bottle Natural
D
170 ml and 250 ml
Black bottle base for S-bottle Wide
E
200 ml and 310 ml
13