Operating Button; Useful Tips - Difrax S Instrucciones De Uso

Operating button

To switch on the S-bottle warmer, press and hold
the operating button for at least 3 seconds
I
until it flashes red and you hear a beep sound.
Once the contents of the bottle has reached the
temperature of 37 °C * the S-bottle warmer will
automatically switch off. you will hear 3 beeps and
the operating button
will turn green. Heating
I
should take approx.3 minutes depending on the am-
bient temperature and the temperature of the food
If you remove the bottle from the S-bottle warmer
during heating, it will not reach the temperature
of 37 °C *. Place the bottle back on the S-bottle
warmer and press the operating button
It will now take less time to heat up the milk.
The special thermometer element on the
heating element measures the temperature
C
of the partially heated food and will therefore
need less time to reach the desired temperature
of 37 °C * before the S-bottle warmer is auto-
matically switched off.
Do not pull the plug if the S-bottle warmer is
turned on from the wall outlet. Never place the
S-bottle including the heating element in its
entirely in the microwave
Important: Never warm up (breast)milk more than once
* +/- 2 °C
.
I
14

Useful tips

The temperature of the heating element
This means that the quality of the breast milk is safeguarded at all
times and that the bottle does not need to be shaken to distribute
the heat evenly
The temperature of the (breast)milk and water in
the bottle will never exceed 39°C, thanks to the
special thermometer element which ensures that
the heating element switches off on time
C
Always press the O-ring valve
B
heating element to avoid any leakage. If you
C
dampen the ring, it will slide across the heating
element more easily
Make sure that the teat (II) is always pulled firmly
on the bottle ring (III) and that both elements are
securely fitted to the bottle (v) to avoid any leakage
To ensure that the warmer heats up correctly, make sure that the
bottle base or is based firmly on the base station
D E
After heating, always shake the food in the bottle to distribute the
heat evenly
Always test a few drops on the inside of your
wrist before feeding your baby to ensure that the
food is at the correct temperature
will never exceed 50°C.
C
FIRMly on the
G
15