Battery Replacement And Insertion - GERATHERM Duotemp GEF-10 Instrucciones De Servicio

MEM
BATTERY REPLACEMENT AND
INSERTION
If no signal is received after changing the bat-
tery, insert the new battery again and press the
ON button.
In order to switch over to
Celcius (°C), press the MEM
button and then press and
release the ON button while
ON
the memory cell number is
displayed on the LCD panel.
When the
appears on the LCD panel,
the battery needs to be
replaced.
Press down on the part
of the cover marked
and push the cover in the
direction of the arrow shown
in the illustration. Remove
the battery.
Attention:
Avoid using any
sharp metal object
in this operation.
Insert a new CR2032
lithium battery, taking care
to match the polarities (+) as
indicated.
Replace the battery cover
by pushing it in the direction
indicated by the arrow in the
illustration.
symbol
11 - GB
GB