Holux M-1200A Guía Rápida página 3

All manuals and user guides at all-guides.com
4. Mini GPS viewer
<Warning>
M-1200A
Do not place the
in a high-temperature environment, or near heat radiating devices such as a
stove or radiator. Doing so will cause the device to breakdown and to function
unstably.
- For further information, please read the user's manual in the supplied CD.
M-1200A
PASSKEY – 0000
-
(For security, some PDAs will prompt users for the
When the GPS connection is working normally, the
status lamp indicates the status by a flash 1 time/1
sec.
You can install the Mini GPS viewer program from the
supplied CD to check current positioning and satellite
signal reception.
Enable the Mini GPS viewer, set the Baud rate to
38400, and press Scan for automatic scanning. Once
you find the correct Com Port, choose GPS Status to
start viewing.
Refer to the "Software Installation" section for details if
you have any difficulty with installation and use.
under strong sunlight for a long time. Do not place it
M-1200A
Passkey)