PCWork PCW03A Manual Del Usuario página 15

WARNING:
•
Do not measure voltage above 1000V DC or 750V AC; otherwise the
instrument might get damaged.
•
If the display shows "OL", disconnect the probes' tips from the measuring
circuit immediately (Overload)
•
Never connect voltage if probes are in current measurement sockets. This
could result in electric shock for the user and damage the device.
•
Pay special attention to safety when measuring high voltage to avoid electric
shock or personal injury.
•
Always test known voltage before using the device, in order to ensure that
the device functions properly.
•
Do not touch the bare tips of the probes; when measuring is finished, always
remove the probes from the measuring object and the device.
When measuring resistance / testing for continuity on the line, disconnect the
power supply, ensure there is no source of voltage, and discharge all capacitors.
Otherwise, the instrument might get damaged and might be in danger of an
electric shock. When measuring is finished, always remove the probes from the
measuring object and the device.
15