Programming; Symbol Overview; Time Synchronisation Of The Controller With Your Computer; Creating A New Lighting Project - EHEIM LEDcontrol 4200120 Manual De Instrucciones

English

7. Programming

7.1 Symbol overview

7.2 Time synchronisation of the controller with your computer

7.3 Creating a new lighting project

Create new lighting project
Open lighting project
Save lighting project
Start - present lighting mode in quick run-through
Stop - present lighting mode in quick run-through
Transfer lighting mode to controller
Time synchronisation between computer and controller
Create new lighting mode
Delete lighting mode
Read lighting mode
Not assigned
Move lighting mode up the list
Move lighting mode down the list
1. Connect the LED controller to your computer via the USB data cable.
The EHEIM powerLED+ light and power supply unit do not have to
be connected to the controller.
2. Start the program EHEIM V2.0.
3. Click on to synchronise the clock of the controller with the clock of
your computer.
If the synchronisation is successful, an acoustic signal will be
emitted by the controller and you will receive a confirmation
message.
4. Close the message with [OK].
1. Start the program EHEIM V2.0.
2. Click on in order to create a new lighting project.
‧ In order to read, view or program the lighting modes, a lighting
project must alwaysbe created!
‧ A lighting project can include several lighting modes, depending
on the requirement.
3. Select Modes as the storage folder.
4. Give the lighting project a unique name, e.g. My Project 2017.lcm
5. Save the new lighting project.
27