Tripp-Lite NGI-U05 Manual Del Propietário página 7

DIN Mounting/Dismounting Instructions
2. The switch can be wall mounted either vertically or
horizontally.
Note: Horizontal mounting is not evaluated by UL.
Mounting direction with screw
Straight Direction
Installation
Grounding the Switch
Grounding and wire routing help limit the effects of line noise
caused by electromagnetic interference (EMI). Run the ground
connection from the ground screw to the grounding surface
prior to connecting devices.
ATTENTION: This switch is intended for mounting on a
well-grounded surface, such as a metal panel.
Mounting direction with screw
Horizontal Direction
Installation
(Horizontal direction is
not evaluated by UL)
7